Printing Parameters
Nozzle Temperature: 270–310°C
Bed Temperature: 90–110°C
Bed Modification: Tape or glue
Active Cooling Fan: 0%–50%
Layer Height: 0.2 mm
Shell Thickness: ≥ 0.8 mm
Print Speed: ≤ 250 mm/s
Note: Settings are based on a 0.4mm nozzle.
Description
High Mechanical Strength & Stiffness: Provides exceptional load-bearing capacity and tensile rigidity, making it ideal for structural and functional engineering components.
Extreme Heat Resistance: Maintains structural integrity under continuous high temperatures, featuring an HDT of 205°C and VST up to 225°C.
Superior Chemical Resistance: Highly resistant to harsh chemicals, solvents, and industrial fluids for reliable long-term performance in aggressive environments.
Lower Thermal Shrinkage: Engineered with reduced thermal contraction to minimize warping and ensure tight dimensional tolerances on complex prints.
Low Moisture Absorption: Resists ambient moisture uptake, preserving mechanical properties and ensuring consistent extrusion quality over time.
High Printing Stability: Formulated for excellent layer adhesion and reliable extrusion across high-speed printing profiles up to 250 mm/s.
Technical Datasheet
Melt Temperature: ~260°C (ISO 11357)
Melt Flow Rate (MFR): 15–20 g/10min¹ (ISO 1133)
Heat Deflection Temperature (HDT): 205°C² (ISO 75)
Vicat Softening Temperature (VST): 225°C³ (ISO 306)
Density: 1.25–1.27 g/cm³ (ISO 1183)
Odor: Odorless
Solubility: Insoluble in water
Note: ¹ Test conditions: T= 270℃; m= 2.16kg. ² Test conditions: 0.45MPa; 120℃/h. ³ Test conditions: 10N; 120℃/h.