Printing Parameters
Nozzle Temperature: 210–240°C
Bed Temperature: 30–60°C
Bed Modification: PEI frosted board
Active Cooling Fan: ON, 50–100%
Layer Height: 0.2 mm
Shell Thickness: ≥ 0.8 mm
Print Speed: 40–150 mm/s
Note: Settings are based on a 0.4mm nozzle.
Description
Fast Water Solubility: Dissolves rapidly and thoroughly in warm water, significantly shortening post-processing cycle times.
Easy Peel & Minimal Residue: Strips away smoothly leaving virtually no surface residue, preserving precise geometry and crisp contact surfaces.
Strong Adhesion to PLA & PETG: Formulated to bond securely with popular main filaments like PLA and PETG, preventing premature detachment or warping mid-print.
High Structural Support Stability: Delivers rigid, reliable support structures capable of upholding complex overhangs and intricate internal geometries.
Clean & Effortless Post-Processing: Simplifies support removal to ensure smooth surface finishes without requiring extensive manual sanding or scraping.
Technical Datasheet
Melt Flow Rate (MFR): 20–30 g/10min¹ (ISO 1133)
Heat Deflection Temperature (HDT): 52°C² (ISO 75)
Vicat Softening Temperature (VST): 68°C³ (ISO 306)
Density: 1.21–1.25 g/cm³ (ISO 1183)
Odor: Odorless
Solubility: Insoluble in water
Note: ¹ Test conditions: T= 210℃; m= 2.16kg. ² Test conditions: 0.45MPa; 120℃/h. ³ Test conditions: 10N; 120℃/h.