THE K6™ PVA
Color
自然色
Weight
This is an effective support material with higher solubility and lower moisture sensitivity, which is soluble in cold water. Even though exposed to air at 50% humidity for several days, its print performance will not be damaged. In addition, it bonds well to other consumables, such as PLA, PETG, and ABS, making it an excellent support material for multi-jet printing. It is transparent in its natural color, non-toxic and odor-free while printing, and soluble in water to be environmentally friendly.
Suggested Printing Parameters
| Nozzle temperature | 200 ~ 230℃ |
| Bed temperature | 35 ~ 55℃ |
| Bed modification | PEI frosted board |
| Active cooling fan | ON, 50~100% |
| Layer height | 0.2mm |
| Shell thickness | ≥ 0.8mm |
| Print speed | ≤ 300mm/s |
Technical Data Sheet (TDS)
| Material Properties | Typical Value | Test Method |
|---|---|---|
| Melt flow rate (MFR)¹ | 8~12g/10min | ISO 1133 |
| Heat deflection temperature (HDT)² | 66℃ | ISO 75 |
| Vicat softening temperature (VST)³ | 79.4℃ | ISO 306 |
| Density | 1.2~1.25g/cm³ | ISO 1183 |
| Odor | Odorless | / |
| Solubility | Dissolve in water | / |