Printing Parameters
Nozzle Temperature: 200–240°C
Bed Temperature: 35–55°C
Bed Modification: Tape or glue
Active Cooling Fan: 50–100%
Layer Height: 0.2 mm
Shell Thickness: ≥ 0.8 mm
Print Speed: ≤ 200 mm/s
Note: Settings are based on a 0.4mm nozzle.
Description
Ultra-Fast Water Solubility: Formulated for rapid dissolution in tap water, drastically reducing soak times compared to conventional PVA.
Peelable / Dissolvable in 30 Minutes: Can be mechanically peeled off or fully dissolved within 30 minutes, giving you flexible post-processing choices.
Broad Material Compatibility (PLA, PETG, ABS, TPU): Bonds securely across a wide array of build materials without delamination during extrusion.
Superior Humidity Resistance: Enhanced formulation minimizes moisture absorption, preventing stringing, nozzle clogging, and shelf degradation.
Ideal for Complex Geometries: Provides crisp support structures for steep overhangs, internal channels, and delicate hollowed models.
Clean & Easy Surface Finish: Leaves a pristine contact surface with zero chemical residue, eliminating the need for tedious manual sanding.
Technical Datasheet
Melt Flow Rate (MFR): 2–8 g/10min¹ (ISO 1133)
Heat Deflection Temperature (HDT): 63°C² (ISO 75)
Vicat Softening Temperature (VST): 78°C³ (ISO 306)
Density: 1.12–1.14 g/cm³ (ISO 1183)
Odor: Low odor
Solubility: Dissolves in water
Note: ¹ Test conditions: T= 190℃; m= 2.16kg. ² Test conditions: 0.45MPa; 120℃/h. ³ Test conditions: 10N; 120℃/h.
Applications
Certificates
