THE K11™ PEI 1010

THE K11™ PEI 1010 is a polyetherimide material applicable to 3D printing. It is characterized by multiple properties, including high strength and toughness, heat deflection temperature and Vicat softening temperature up to about 200°C, resistance to gasoline, various hydrocarbon solvents, dilute acids and alkalis, and flame retardancy grade up to UL94 V-0. It is widely applicable to concept modeling, functional prototypes, end-use components.

Technical Data Sheet (TDS)

Material Properties	Typical Value	Test Method
Melt temperature	~320℃	ISO 11357
Melt flow rate (MFR)¹	35~40g/10min	ISO 1133
Heat deflection temperature (HDT)²	208℃(before annealing)/ 182℃(after annealing)³	ISO 75
Vicat softening temperature (VST)³	210℃	ISO 306
Density	1.28g/cm³	ISO 1183
Odor	Odorless	/
Solubility	Insoluble in water	/

        Suggested Printing Parameters
    
                Nozzle temperature
                360 ~ 390℃
            
                Bed temperature
                150 ~ 240℃
            
                Chamber temperature
                90 ~ 220℃
            
                Bed modification
                High temperature glue
            
                Active cooling fan
                OFF
            
                Layer height
                0.2mm
            
                Shell thickness
                ≥ 0.8mm
            
                Print speed
                30~60mm/s
            
        Settings are based on a 0.4mm nozzle.